ibutton

Open Source ESP32 Project for Pentesting.

Lightweight onewire protocol library for embedded systems. It uses UART peripheral or GPIO toggling

A Collection Of Files From Various Sources Specifically For The Flipper Zero Device (In Progress)

Arduino library handling iButton identification tags such as DS1990A, TM1990A, RW1990, RW1990.2, RW2004, TM2004, TM01 and many others. Supports writing a new identification code to (re)writable iButton tags and reading of multiple iButton probes on the same data line.

Arduino UNO / Nano iButton reader as well as programmer for writable iButtons of type RW1990

Traductions, Wiki, Scripts et divers fichiers pour FlipperZero

scan copy write ibutton case

Touch Memory key duplicator on ESP8266

iButton / Dallas key grader for Flipper Zero. Touch a 1-Wire key to the contact and find out what it actually proves - a plain-English security grade, the ROM's checksum verified, and sequentially issued keys called out. Strictly read-only.

Networked RGB LEDs

Arduino Nano based universal RFID (125kHz) & iButton emulator, reader, and duplicator with OLED display.

Python script for read and publish via MQTT the keytag of iButton DS1990A, DS1985-F5+, DS1971+F5 with OneWire bus of the Raspberry Pi

ESP32 Firmware for Pentesting.

Go packages to interface with the Linux Netlink, Connector and One-Wire subsystems

ibutton2uid library

A device that replaces Dallas DS 1990 (iButton) and works with arbitrary serial number

PolicyProbe — a Flipper Zero physical-security compliance scanner: audits RFID/NFC, sub-GHz, IR and iButton access control and maps every finding to ISO/IEC 27001 and NIST SP 800-53 controls

Arduino sketch for an iButton cloner

A collection of notes and scripts which may help you recovering the data of a dead iButton