mcufriend

GUIslice drag & drop embedded GUI in C for touchscreen TFT on Arduino, Raspberry Pi, ARM, ESP8266 / ESP32 / M5stack using Adafruit-GFX / TFT_eSPI / UTFT / SDL

Program to create a freely paintable canvas on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library

Program to load a BMP image from an SD Card and display it on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with Arduino UNO R3/R4 and MCUFRIEND Library

Program to demonstrate data logging using an SD Card with a 3.5" TFT LCD Touchscreen Display (using ILI9486 Driver), Arduino UNO R3/R4 and MCUFRIEND Library

Program to calibrate 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library

Program to demonstrate the usage of configuration files as separate entities from the program, using an SD Card with a 3.5" TFT LCD Touchscreen Display (using ILI9486 Driver), Arduino UNO R3/R4 and MCUFRIEND Library

Program to play TicTacToe on 3.5" TFT LCD Touchscreen Displays (using ILI9486 Driver) with the Arduino UNO R3/R4 and MCUFRIEND Library

MCUFRIEND ST7789V TFT Calculator Snippet for Arduino. Pull request to make better wanted.

In this project ı will share with you mcufrien ILI9325 touch display arduino library for esp32 dev board

Matrix Rain for TFT 3.5" (MCUFRIEND_kbv) Arduino UNO R3

Graphical simulation of the Enigma Machine which runs on an Arduino+MCUFriend touchscreen

•This is a program used to make a TFT touchscreen calculator that performs all the basic operations with a visually appealing user interface.•This project requires an Arduino UNO R3 and a TFT Arduino shield.•Arduino IDLE is used to compile and upload the code and libraries like Adafruit_gfx Mcufriend_kbv are used to calibrate the TFT touchscreen…

Controlling Discord using a combination of Arduino, BetterDiscord, and Python.